Murphy Concrete Lifting
Concrete Lifting in Murphy, TX
Concrete slab lifting and foam leveling in Murphy, TX — driveways, patios, garage floors. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Murphy and nearby communities.
Get a free estimate
Tell us about the project and how to reach you.
Concrete Lifting
Slab Raising in Murphy, TX
Sunken concrete around Murphy usually isn't a foundation problem. It's fill soil settling under the slab, and it's common in newer subdivisions built fast during Murphy's growth from roughly 3,000 residents in 2000 to over 21,000 by 2020. Collin County's expansive clay makes it worse, swelling and shrinking with every wet and dry stretch.
Murphy Concrete Lifting raises sunken driveways, patios, sidewalks, and garage floors with polyurethane foam injection. No jackhammers, no full tear-out. Explore [Concrete Slab Lifting](/services/concrete-slab-lifting), [Polyurethane Foam Leveling](/services/polyurethane-foam-leveling), [Driveway Leveling](/services/driveway-leveling), [Patio Repair](/services/patio-repair), [Garage Floor Repair](/services/garage-floor-repair), and [Sidewalk Leveling](/services/sidewalk-leveling), or [contact us](/contact) for a free estimate. Want to know who's showing up at your door? Read [about our crew](/about).
What we do
Concrete Lifting services
Concrete Lifting across Murphy and the surrounding area.
Residential Services
Concrete Slab Lifting
Concrete slab lifting in Murphy, TX raises sunken driveways, walks, and patios with foam injection. Free estimates, same-day results.
Learn more →
Polyurethane Foam Leveling
Polyurethane foam leveling in Murphy, TX lifts sunken concrete with small ports and fast cure times. Free estimates, minimal yard disruption.
Learn more →
Driveway Leveling
Driveway leveling in Murphy, TX fixes sunken panels with foam injection, drivable same day. Free estimates for uneven driveways.
Learn more →
Patio Repair
Patio concrete repair in Murphy, TX levels sunken slabs near the back door with foam injection. Free estimates, same-day cure.
Learn more →
Garage Floor Repair
Garage floor leveling in Murphy, TX closes gaps at the threshold with foam injection. Free estimates, same-day results.
Learn more →
Sidewalk Leveling
Sidewalk leveling in Murphy, TX fixes trip-hazard panels with foam injection instead of full replacement. Free estimates.
Learn more →
Pool Deck Leveling
Pool deck leveling in Murphy, TX raises sunken deck slabs without cracking tile or coping. Free estimates, low-pressure injection.
Learn more →
Sunken Concrete Repair
Sunken concrete repair in Murphy, TX fixes dropped slabs across driveways, walks, and patios. Free estimates, fill-soil settlement fix.
Learn more →
Commercial Services
Commercial Concrete Leveling
Commercial concrete leveling in Murphy, TX fixes sunken slabs at retail pads and offices with foam injection. Free estimates.
Learn more →
Warehouse Floor Leveling
Warehouse floor leveling in Murphy, TX corrects uneven slabs for racking and forklift traffic. Free estimates, minimal downtime.
Learn more →
Parking Lot Repair
Parking lot repair in Murphy, TX levels sunken pavement sections with foam injection. Free estimates for commercial lots.
Learn more →
Loading Dock Leveling
Loading dock leveling in Murphy, TX fixes uneven aprons for smoother forklift and truck access. Free estimates, minimal downtime.
Learn more →
Looking for something else? Browse all services in the menu, or tell us about a custom project.
Why choose us
Why choose Murphy Concrete Lifting
Foam cures in minutes, not days
Polyurethane foam sets in about 15 minutes. Mudjacking crews need days before you can load the slab.
Small ports, not excavation
We drill dime-size holes to inject foam. No jackhammers, no torn-up yard.
Written estimates before any drilling
You see the scope and price range before we touch the slab. No surprise line items.
Local crew who knows Collin County soil
Murphy's fill-soil subdivisions settle in a predictable pattern. We've seen it enough times to diagnose it fast.
Have a project in mind?
Get a Free EstimateHow it works
How our Concrete Lifting process works
Step 1Site visit and slab inspection
We walk the property and map every low spot on your concrete.
Step 2Void mapping
We check for hollow spots and confirm depth under the sunken area.
Step 3Drilling small ports
Small holes go in at each low point, sized for the injection hose.
Step 4Foam injection and lift
Polyurethane foam expands under the slab and raises it back to grade.
Step 5Seal and cleanup
Ports get patched, the site gets swept, and the slab is ready for use.
Step 6Follow-up check
We confirm the lift held and answer any questions about the repair.
Ready to start?
Get a Free EstimateCost
Concrete Lifting Cost in Murphy, TX
Pricing depends on slab size, how deep the void runs, and how easy the area is to access. Nobody can give you an honest number sight unseen, but here's the general range: Call for a free estimate and we'll walk the slab with you before quoting anything.
| Project type | Typical range | What’s included |
|---|---|---|
| Small patch or void fill | $300–$800, | single low spot, minimal foam volume. |
| Driveway panel or two | $600–$1,800, | one to two sunken sections. |
| Patio or sidewalk | $800–$2,500, | depending on square footage. |
| Whole driveway or pool deck | $2,000–$6,000+ | , multiple panels or a large deck area. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateMaterials
Materials We Use: Foam vs Mudjacking
Foam and mudjacking both lift concrete, but they behave differently once North Texas clay starts moving again.
Two-component polyurethane foam
Closed-cell and water resistant, so it holds its shape as clay swells and shrinks through wet and dry seasons. It also weighs a fraction of cement slurry, which reduces load on already-settled fill soil.
Cement/mud slurry
The traditional mudjacking mix. It's heavier, stays soft longer while curing, and can break down faster where soil keeps shifting.
Polyurethane port sealant
Patches the small injection holes after the lift, matching the surrounding concrete so the repair isn't an eyesore.
Questions on materials?
Get a Free EstimateTimeline
How long does a Concrete Lifting take?
Most jobs are done in a single visit. Here's roughly how the day breaks down: Foam is why most homeowners are back to using their driveway or patio before the crew even leaves the block.
- 01
Inspection
same day - 02
Foam injection
1–3 hours - 03
Cure time
- 04
Mudjacking cure (if used)
1–2 days
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits, Codes, and Compliance for Slab Lifting
Slab lifting usually falls outside permit requirements, but a few related jobs don't. Always verify with the city or Collin County before starting work.
| Typically needs a permit | Often no permit |
|---|---|
| Full slab replacement or repour | Foam injection into an existing slab |
| Structural foundation repair (piers | Void filling under a driveway or patio |
| beams) | Mudjacking of an existing slab |
| New concrete pours or additions | — |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Concrete Lifting Pro
| DIY | Hire a pro |
|---|---|
| Canned foam kits lack the lift force or structural rating for a real slab | Metered foam injection controls lift height precisely, panel by panel |
| Rental mudjack pumps risk overpressure, which can crack the panel further | Handles voids under load-bearing driveways and garage floors safely |
| Fine only for cosmetic gaps under about a quarter inch | Written estimate and a crew that's done this exact repair before |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to Call for Concrete Lifting
None of these mean an emergency, but they don't fix themselves either. We serve Murphy (primary area), Parker, and Addison with the same foam-injection approach, so call whenever you're ready for a look.
- A trip lip over half an inch has formed at a slab edge
- There's a gap opening at the garage or porch threshold
- Water is pooling toward the foundation instead of draining away
- Cracks are widening season to season instead of staying put
Seeing warning signs?
Get a Free EstimateWhere we work
Serving Murphy and nearby communities
Local pages for these communities. Nearby towns without a page are still in our service area.
Also serving
Sachse · Seis Lagos · Richardson · Lucas · Plano · Lavon · Nevada · Sunnyvale · Heath · McLendon-Chisholm · and others
Outside these locations?
Before & after
See the work up close
Before 
After
Customer feedback
What local customers say
Nancy K.
1 week ago
5 out of 5 starsHonestly did not expect such a professional team. They showed up on time, explained every step, and the concrete lifting turned out better than I pictured.
Murphy, TX
Andrew R.
4 weeks ago
5 out of 5 starsPrice was way more affordable than the other quotes we got for driveway leveling. Still felt premium — clean jobsite, solid finish, and I'd hire them again without thinking twice.
Sunset Pointe, TX
Amanda M.
2 days ago
5 out of 5 starsCalled Murphy Concrete Lifting after a neighbor tip in Murphy. Super easy to deal with — clear answers, no runaround, and they actually cared about the details on our patio repair.
Winchester Estates, TX
Common questions
Concrete Lifting FAQs
Is mudjacking or foam better for a Texas clay soil area?
Polyurethane foam handles North Texas clay better because it's closed-cell and water resistant. Cement slurry stays porous and can break down faster as the clay shifts wet to dry.
Will canned spray foam from the hardware store actually lift a slab?
No. Canned foam has no metered pressure and no structural rating. It's built for gap filling, not raising thousands of pounds of concrete.
What is the best way to lift a concrete slab?
Polyurethane foam injection through small drilled ports is the standard method for most residential slabs. It lifts precisely, cures fast, and doesn't require removing the concrete.
What is a good tool to lift concrete?
A metered two-component foam injection rig is what professionals use. It controls pressure and lift rate in ways a rental jack or hand pump can't match.
How much does concrete lifting cost in Murphy?
Most jobs run from a few hundred dollars for a small void fill up to a few thousand for a full driveway or pool deck. A free estimate gets you an exact number for your slab.
How long does concrete lifting take?
Most residential jobs finish in a single visit. Foam cures in about 15 minutes, so you're often back to using the surface the same day.
Do I need a permit for concrete lifting?
Lifting or injecting foam into an existing slab typically doesn't require a permit in Murphy or Collin County. Replacing a slab or doing structural foundation work usually does. Check with the city if you're unsure.
Is DIY concrete lifting a good idea?
Only for cosmetic gaps under a quarter inch. Anything larger risks cracking the slab further without metered pressure control, which is why most homeowners call a pro for driveways, patios, and garage floors.
Ready for a clear estimate?
Tell us about the project, or call to talk through options in Murphy.